Miele Washer-Extractors
Professional Laundry Solutions
Quality You Can Rely On
A demanding working day requires products you can always rely on 100%. To guarantee this reliability, all appliances from Miele Professional undergo comprehensive quality tests and an extremely rigorous final inspection. The ongoing and stringent quality controls are an important part of the high quality standards that Miele Professional sets itself. In order to have the greatest control possible over production, the most important components are also manufactured in house. The result is an extraordinary range of in-house manufactured components: metal foundry, manufacture of plastic parts, motor development and electronics production – Miele carries out all of these production stages itself and so has a firm hand on quality across all the different areas.
Quality You Can Rely On
A demanding working day requires products you can always rely on 100%. To guarantee this reliability, all appliances from Miele Professional undergo comprehensive quality tests and an extremely rigorous final inspection. The ongoing and stringent quality controls are an important part of the high quality standards that Miele Professional sets itself. In order to have the greatest control possible over production, the most important components are also manufactured in house. The result is an extraordinary range of in-house manufactured components: metal foundry, manufacture of plastic parts, motor development and electronics production – Miele carries out all of these production stages itself and so has a firm hand on quality across all the different areas.
High Spin Speeds
Miele has increased its washers capabilities to extract more water with high spin speeds and the highest G-forces (over 50 g’s) in the industry. This cuts drying time in half and reduces energy consumption, resulting in fast drying times and better work flow.
High Spin Speeds
Miele has increased its washers capabilities to extract more water with high spin speeds and the highest G-forces (over 50 g’s) in the industry. This cuts drying time in half and reduces energy consumption, resulting in fast drying times and better work flow.
Powerful Heating & Disinfection Capability
Miele’s on-board heaters and narrow hysteresis allow programs that heat water up to 200° F and hold temps for specific periods of time. Thus thermal disinfection without the need for bleach is achieved. This is better for the environment and increases the longevity of the textiles.
Powerful Heating & Disinfection Capability
Miele’s on-board heaters and narrow hysteresis allow programs that heat water up to 200° F and hold temps for specific periods of time. Thus thermal disinfection without the need for bleach is achieved. This is better for the environment and increases the longevity of the textiles.
PW6068 Little Giants
- Load Capacity: 15 lb
- Delay start up to 24 hrs and 3 different user interfaces
- 21 standard programs
- Stainless Steel or Lotus White
- Drum: 2.1 cu. ft./59 L
- Spin speed: 1400 rpm
- 33.5″ H x 23.7″ W x 28.6″ D
- Depth (door open): 44″
- 2 AC (2-pole) 208-240V 60Hz, 2-pole 30 A
- Drain Pump 3/4″ connection vented
PW6080 Octoplus
- Load Capacity: 20 lb
- Delay start up to 24 hrs and 3 different user interfaces
- 16 standard/52 targeted programs
- Octoblue powder-coated finish
- Drum: 2.8 cu. ft./80 L
- Spin speed: 1300 rpm
- 40.2″ H x 27.6″ W x 28.7″ D
- Depth (door open): 46″
- 2 AC (2-pole) 220-240V 60Hz (conv. to 208V), 2-pole 30 A
- Drain Valve 2″ connection or Drain Pump 3/4″ connection vented
PW5105 Octoplus
- Load Capacity: 25 lb
- Delay start up to 24 hrs and 3 different user interfaces
- 16 standard/52 targeted programs
- Octoblue powder-coated finish
- Drum: 3.5 cu. ft./100 L
- Spin speed: 1100 rpm
- 40.2″ H x 27.6″ W x 32.6″ D
- Depth (door open): 50″
- 2 AC (2-pole) 220-240V 60Hz (conv. to 208V), 2-pole 30 A
- 1 cold/1 hot water line with 3/4″ connection
- Drain Valve 2″ connection
Stacked Little Giants
- PW6068 can be stacked with PT7138 or PT7135C with stacking kit
- Stacking kit required
- Stainless Steel or Lotus White
Stacked Octoplus
- Octoplus 20 lb PWT6089 & PT7189 must be ordered together and can only be used with each other
- PWT6089: Drain Pump, 2 AC 220-240V 60Hz (conv. to 208V), 2-pole 30 A
- PT7189: 2 AC 208V 60Hz, 2-pole 30 A or 2 AC 220-240V 60Hz, 2-pole 30 A
PW413
- Load Capacity: 30 lb
- 12 standard programs
- Octoblue front
- Drum: 4.6 cu. ft./130 L
- Spin speed: 1025 rpm
- 53.3″ H x 31.5″ W x 39.8″ D
- Depth (door open): 59″
- Electrically heated: 3 AC (3-pole) 220-240V 60Hz (conv. to 208V), 3-pole 25 A
- Non-heated: 3 AC (3-pole) 220-240V 60Hz (conv. to 208V), 3-pole 16 A
- 2 cold/1 hot water, line with 3/4″ connection
PW418
- Load Capacity: 45 lb
- 12 standard programs
- Octoblue front
- Drum: 6.4 cu. ft./180 L
- Spin speed: 950 rpm
- 57.2″ H x 36.4″ W x 37.4″ D
- Depth (door open): 56″
- Electrically heated: 3 AC (3-pole) 220-240V 60Hz (conv. to 208V), 3-pole 40 A
- Non-heated: 3 AC (3-pole) 220-240V 60Hz (conv. to 208V), 3-pole 16 A
- 2 cold/1 hot water, line with 3/4″ connection
PW811
- Load Capacity: 25 lb
- Freely programmable
- Stainless Steel front
- Drum: 3.9 cu. ft./110 L
- Spin speed: 1150 rpm
- 53.3″ H x 31.5″ W x 37″ D
- Depth (door open): 56″
- Electrically heated: 3 AC (3-pole) 220-240V 60Hz (conv. to 208V), 3-pole 25 A
- 2 cold/1 hot water, line with 3/4″ connection
PW814
- Load Capacity: 35 lb
- Freely programmable
- Stainless Steel front
- Drum: 5 cu. ft./140 L
- Spin speed: 1075 rpm
- 57.2″ H x 36.4″ W x 33.5″ D
- Depth (door open): 52″
- Electrically heated: 3 AC (3-pole) 220-240V 60Hz (conv. to 208V), 3-pole 40 A
- Steam heated: 3 AC (3-pole) 220-240V 60Hz (conv. to 208V), 3-pole 16 A
- 2 cold/1 hot water, line with 3/4″ connection
PW818
- Load Capacity: 45 lb
- Freely programmable
- Stainless Steel front
- Drum: 6.4 cu. ft./180 L
- Spin speed: 1075 rpm
- 57.2″ H x 36.4″ W x 37.4″ D
- Depth (door open): 56″
- Electrically heated: 3 AC (3-pole) 220-240V 60Hz (conv. to 208V), 3-pole 50 A
- Steam heated: 3 AC (3-pole) 220-240V 60Hz (conv. to 208V), 3-pole 16 A
- 2 cold/1 hot water, line with 3/4″ connection
PW6321
- Load Capacity: 70 lb
- Freely programmable
- Stainless Steel front
- Drum: 11.3 cu. ft./320 L
- Spin speed: 1100 rpm
- 64.6″ H x 42.8″ W x 50.1″ D
- Depth (door open): 69″
- Electrically heated: 3 AC (3-pole) 220-240V 60Hz (conv. to 208V), 3-pole 80 A (3-pole 70 A)
- Steam heated: 3 AC (3-pole) 208V 60Hz (conv. to 220-240V), 3-pole 15 A
- 3 cold/1 hot water, line with 1″ connection